Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Akagi, Yosuke*; Kato, Hiroyasu*; Tachi, Yukio; Sakamoto, Hiroyuki*
Progress in Nuclear Science and Technology (Internet), 5, p.233 - 236, 2018/11
A large amount of radioactive contaminated concrete will be generated from the decommissioning in the Fukushima Dai-ichi Nuclear Power Plant (NPP). For developing the plans of decommissioning and waste management including decontamination and disposal, it is important to estimate radionuclides inventory and concentration distribution in the concrete materials. In this study, effective diffusivities (De) and distribution coefficients (Kd) of HTO, Cs, I and U in OPC mortar were measured by through-diffusion and batch sorption experiments. De values derived were in the sequence of HTO, I, Cs, U, implying that cation exclusion effects may be important mechanisms in OPC mortar. Kd values derived by batch tests were higher by more than one order of magnitude than the diffusion-derived Kd values, indicating that crushing of samples had a strong influence on sorption. Diffusion and sorption mechanisms in OPC mortar were evaluated to predict the penetration behavior of these radionuclides.
Inoue, Takashi; Hanada, Masaya; Kashiwagi, Mieko; Nishio, Satoshi; Sakamoto, Keishi; Sato, Masayasu; Taniguchi, Masaki; Tobita, Kenji; Watanabe, Kazuhiro; DEMO Plant Design Team
Fusion Engineering and Design, 81(8-14), p.1291 - 1297, 2006/02
Times Cited Count：11 Percentile：60.27(Nuclear Science & Technology)Requirement and technical issues of the neutral beam inejctor (NBI) is discussed for fusion DEMO plant. The NBI for the fusion DEMO plant should be high efficiency, high energy and high reliability with long life. From the view point of high efficiency, use of conventional electrostatic accelerator is realistic. Due to operation under radiation environment, vacuum insulation is essential in the accelerator. According to the insulation design guideline, it was clarified that the beam energy of 1.5
2 MeV is possible in the accelerator. Development of filamentless, and cesium free ion source is required, based on the existing high current/high current density negative ion production technology. The gas neutralization is not applicable due to its low efficiency (60%). R&D on an advanced neutralization scheme such as plasma neutralization (efficiency: 
80%) is required. Recently, development of cw high power semiconductor laser is in progress. The paper shows a conceptual design of a high efficiency laser neutralizer utilizing the new semiconductor laser array.
Suzuki, Satoshi; Ezato, Koichiro; Hirose, Takanori; Sato, Kazuyoshi; Yoshida, Hajime; Enoeda, Mikio; Akiba, Masato
Fusion Engineering and Design, 81(1-7), p.93 - 103, 2006/02
Times Cited Count：12 Percentile：63.1(Nuclear Science & Technology)This paper presents an R&D activity on the plasma facing components (PFCs), such as first wall and divertor, for the fusion power plant. The PFCs of the power plant will be subjected to heavy neutron irradiation and high heat/particle flux from plasma during the continuous operation. In the present design of the PFCs, the candidate structural material is a reduced activation ferritic-martensitic steel, F82H, from the viewpoints of low activation and high robustness against neutron irradiation, and the candidate armor material is tungsten from the low sputtering yield and low tritium retention points of view. To realize the PFCs using such materials, JAERI has bee extensively conducting R&Ds on; (1) high performance cooling tube, (2) tungsten armor materials, (3) selection of a bonding technique for F82H and tungsten materials and (4) evaluation of structural integrity. Recent achievements on these R&Ds are presented.
Naka Fusion Research Establishment
JAERI-Review 2005-046, 113 Pages, 2005/09
JAERI-Review-2005-046.pdf:24.35MB
This annual report provides an overview of research and development activities at Naka Fusion Research Establishment, including those performed in collaboration with other research establishments of JAERI, research institutes, and universities, during the period from 1 April, 2004 to 31 March, 2005. The activities in the Naka Fusion Research Establishment are highlighted by researches in JT-60 and JFT-2M, theoretical and analytical plasma researches, research and development of fusion reactor technologies towards ITER and fusion power demonstration plants, and activities in support of ITER design and construction.
Oka, Kiyoshi
JAERI-Research 2004-009, 225 Pages, 2004/07
JAERI-Research-2004-009.pdf:47.47MB
In the present paper, I describe the necessary approaches and elemental technologies to solve the issues on the system integration of the typical robot systems for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities. These robots work under the intense radiation condition and restricted space in place of human. In particular, I propose a new approach to realize the system integration of the robot for actual use from the viewpoints of not only the environmental and working conditions but also the restructure and optimization of the required elemental technologies with a well balance in the robot system. Based on the above approach, I have a contribution to realize the robot systems working under the actual conditions for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities.
Matsukawa, Makoto; Tobita, Kenji; Chikaraishi, Hirotaka*; Sagara, Akio*; Norimatsu, Takayoshi*
Purazuma, Kaku Yugo Gakkai-Shi, 80(7), p.559 - 562, 2004/07
Final purpose of the fusion energy development is to utilize the produced fusion power mainly as electric power for the easiness of transmission and conversion. In spite of the type of fusion power plant, large circulating electric power should exist in the plant for the plasma heating, current drive. This paper describes the electric power flow in the nuclear fusion power plants to be built as the DEMO reactor beyond ITER. Here, the necessity of the local energy storage and high efficient converter will be also discussed.
Naka Fusion Research Establishment
JAERI-Review 2003-035, 129 Pages, 2003/11
JAERI-Review-2003-035.pdf:13.55MB
This annual report provides an overview of research and development (R&D) activities at Naka Fusion Research Establishment in collaboration with other research establishment of JAERI, research institutes, and universities during the period from 1 April, 2002 to 31 March, 2003. The activities in the Naka Fusion Research Establishment are highlighted by high performance plasma researches in JT-60 and JFT-2M, R&D of fusion reactor technologies towards ITER and fusion power demonstration plants, and activities in support of ITER design and construction.
